Welcome to Kangfeides Industrial Limited!
PRODUCTS SHOW
  High Carbon Steel Grit
  High Carbon Steel Shot
  Stainless Steel Cut Wire Shot
  Steel Cut Wire Shot
PRODUCT SHOW/Company

Steel Cut Wire Shot
Size: 0.6mm / 0.8mm / 1.0mm / 1.2mm / 1.5mm / 2.0mm / 2.5mm
AS-Cut & Round / Conditioned both available.
The hardness ranging from 36 - 52 HRC (Typical hardness : 40-50 HRC) can be made according to the customers requirements.

Specification:

Product

Steel Cut Wire

Chemical Composition
%

C

0.45-0.85

Mn

0.60-1.20

Si

0.10-0.30

S

≤0.050

P

≤0.045

Hardness (HRC)

36-52

Tensile Strength (Mpa)

1660-2200

Density (g/cm³)

7.8

Bulk Density (g/cm³)

4.4

Metallographic Structure

Deformed Pearlite

Application for cut wire steel shot:
Blast cleaning: Used for blast cleaning of casting, die-casting, forging, sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure, descaling of forging.
Shot peening: Shot peening of gear, heat treatment.
Shot blasting: Shot blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure,before-painting.
2016COPYRIGHT@Kangfeides Industrial Limited Address: No.111, Liuquan Rd, Zibo, Shandong, China. Zip:255000
Phone: +86-157 6285 8378 E-mail: sales@kangfeides.com E-mail: kangfeides@qq.com http://www.metal-abrasive.com/